Viewing Issue Advanced Details
ID Category [?] Severity [?] Reproducibility Date Submitted Last Update
02032 Sound Minor Always Jul 22, 2008, 07:43 Jun 10, 2019, 18:33
Tester john_iv View Status Public Platform MAMEUI
Assigned To Resolution Open OS Windows XP/Vista 64-bit
Status [?] Confirmed Driver seattle.cpp
Version 0.126u1 Fixed in Version Build 64-bit
Summary 02032: hyprdriv: Sound level not accurate until - or = button pressed.
Description The current sound level for HyperDrive is too low until the - or = keys are pressed once, then it's at the appropriate level.
Steps To Reproduce Launch game.
Listen for music at beginning of demo.
Hit the - or = key on the keyboard once.
Note the sound increases to the appropriate level.
It also drops down again when the demo begins a race and you have to keep hitting the keys to get the sound back to the level it should be.
Additional Information
Flags
Regression Version
Affected Sets / Systems hyprdriv
Attached Files
png file icon volumes blitz2000.PNG (473,967 bytes) Jun 10, 2019, 18:27 Uploaded by MetalGod
MetalGod
png file icon volume hyprdrv.PNG (356,695 bytes) Jun 10, 2019, 18:28 Uploaded by MetalGod
MetalGod
Relationships
There are no relationship linked to this issue.
Notes
6
User avatar
No.01798
Tafoid
Administrator
Jul 25, 2008, 15:53
Even though I run this at under 20% speed, I can see when you hit the = or - button, the volume jumps up.
User avatar
No.16518
Hydreigon
Tester
Jun 8, 2019, 20:23
edited on: Jun 10, 2019, 13:04
I'm unable to produce this as of 0.210. Volume adjustment works fine as is.

Edit: Misread the details. Sorry about that.
User avatar
No.16520
MetalGod
Senior Tester
Jun 9, 2019, 20:24
Tested
This is not solved yet. Absolutely no changes here.
Still need to press any volume key to turn the volume back into its adjusted configuration between each scene of the demo.
User avatar
No.16521
Hydreigon
Tester
Jun 10, 2019, 13:07
I guess the only way to find out is to test this on an actual pcb (requires clearing the data first). I have a feeling this is a bug on actual hardware.
User avatar
No.16525
MetalGod
Senior Tester
Jun 10, 2019, 18:33
It only affects attract mode
User avatar
No.16526
MetalGod
Senior Tester
Jun 10, 2019, 18:33
I've found out that on Test Menu there's a separation between Ingame volume and attract mode volume.
1) Ingame volume configuration can be set inside Test Menu=>Volume Level
2) Attract Mode Volume configuration is set in Test Menu=>Adjustments=>Aditional Adjustments=>Attract Mode Volume

So, the volume keys of the game will only affect the ingame volume configuration permanently. When pressed on attract mode the volume is just altered during the present cutscene. Once the cutscene is over, the attract volume is back to its parameters inside the test menu.

On the seattle board this was improved years later in Blitz 2000 in which, when pressing the volume keys, it distinguish between attract mode volume and ingame volume (see first attached image).
As you can see, in Hyperdrive there's only a Volume line, which only refers to the ingame volume (see second attached image).

I guess this is the normal behaviour of Hyperdrive and this ticket could be closed.